HI-Weldmesh fence

 

HI-Weldmesh fence

Galvanized and PVC coated welded mesh in rolls
-------------------------------------------------------------------------------------------------------------------------------------

Introduction :

Hi -vWeldmesh Rolls made with bright drawn mild steel wire and electronically welded at every intersection. it is Galvanized After Weld.

These products are made by dipping previously welded mesh into a bath of molten zinc. The entire fence or mesh, including the welded areas, is thoroughly sealed and protected against rust and corrosion . It is available in 25m roll and wire thicknesses between 2.5mm and 2.8mm, and option of PVC coated with 2.5/3.0 and 3.0/3.55mm and in different mesh platterns-50x50mm,50x100mm or 50x200mm. A range of heights of weld mesh fencing rolls is available from 1.0m to 2m high.

Benefits :

• Welded mesh is more dense, welded on each connection and rigid compare to chainlink system.


• The wire is (galvanization+ primer + organic coating) ensures a unique corrosion protection, a perfect adhesion of the organic coating and a durable smooth surface .


• Very robust mesh


• Impact resistant – its mesh size prevents climbing


• Good colour stability

Application :

• Residential


• Industry


• Sport

Post :

• Post made of 50mm dia pipes as per BS or ASTM standard


• Supplied with clamp, fixing accessories, nut and bolts


• In option of post welded on the base plate, post with double Y crank extension or post length extended.

Mesh :

Welded mesh W 50x50mm,50x200mm
Galvanized Horizontal and vertical wires Ø:2.5 and 2.8 mm
Galvanized and PVC Horizontal and vertical wires Ø:2.5 /3.0mm and 3.0/3.55 mm.

Tensile Strength of wire
Horizontal	vertical
400-550 N/MM²	650-850 N/MM²

Gate :

Matching gate are available in single or double leaf, swing, sliding and tracked in manual operation or automatic.

Finish Options :

Products are hot deep Galvanized to BS EN 1461
Galvanized and powder coated to BS EN 13438
Only powder coating to non standard
Marine coat Coating for application near salt water

Standerd Drawing: :

Standerd Dimension:

Mesh height	Mesh dimension	Wire diameter	Nos tension wire	Post with Extension length				Post with			Post with
				*Post Diameter	Nos of barbed wire		Total Height	*Post Diameter	Nos of barbed wire	Total Height	*Post Diameter	Nos of barbed wire	Total Height
1000	50x50mm, 50x100mm, and 50x200mm	Galv. 2.5mm & 2.8mm/PVC coated 2.5/3.0mm & 3.0/3.5mm	2	50mm		3	1350	50mm	3	1350	50mm	6	1350
1200			2	50mm		3	1550	50mm	3	1550	50mm	6	1550
1500			3	50mm		3	1850	50mm	3	1850	50mm	6	1850
2000			3	50mm		3	2350	50mm	3	2350	50mm	6	2350